TM 9-2320-209-34-2-2 d. Cleaning. There are no special cleaning procedures needed. Refer to cleaning procedures given in Part 1, para 1-3. e. Inspection and Repair. FRAME 1 1. Check that cylinder rod (1) is not cracked, chipped or bent. 2. Check that retainer (2) is not chipped or cracked. 3. Check that sleeve bushing (3) is not burred cracked, scored or grooved. 4. Check that cylinder head (4) is not chipped or cracked. 5. Check that two retaining plates (5), two cups (6), and rod follower (7) are not chipped or cracked. 6. Check that cylinder (8) is not chipped cracked or dented. 7. Check that all threaded parts are not stripped or crossthreaded. 8. If parts are damaged, get new ones. END OF TASK 17-702