TM 9-2320-209-34-2-2 1. 2. 3. Put screw (1) through clamp bracket (2). Put clamp (3) over supply hose (4) and return hose (5) and tighten screw (1). Unplug and finger tighten supply hose (4) and reurn hose (5) as tagged. Tighte-n couplings 1/8 turn with wrench. Take off tags. NOTE Follow-on Maintenance Action Required: 1. Put in hydraulic fluid. Refer to LO 9-2320-209-12/1. 2. Replace rear splash shield and braces. Refer to para 17-69. 3. Replace inner and outer rear wheels. Refer to TM 9-2320-209-10. END OF TASK 17-696