TM 9-2320-209-34-2-2 FRAME 2 WARNING Leg assembly (1) is very heavy and must be properly supported and balanced on floor jack before taking out mounting screws (2). If care is not taken, assembly can fall and injure personnel and damage equipment. Soldier A 1. Take shoe (3) out of bracket (4). Soldier B 2. Hold screws (2) when soldier A takes off nuts (5). Soldier A 3. Take off 20 nuts (5). Soldier B 4. Take out 16 of 20 screws (2). Leave in four screws (2), two on each side of leg assembly (1) to keep it from shifting. CAUTION Be careful when pulling leg assembly (1) away from truck. Cylinder lines can be easily damaged. Soldiers 5. Holding leg assembly (1), take out four screws (2). A and B Soldiers 6. While soldiers C and D move jacks and supports, soldiers A and B A,B,C, move leg assembly (1) away from truck. and D 7. Carry leg assembly (1) to workbench. END OF TASK 17-689