TM 9-2320-209-34-2-2 d. Cleaning. (1) Clean all bearings. Refer to Part 1, para 10-8. (2) There are no special cleaning procedures needed for all other parts. Refer to cleaning procedures given in Part 1, para 1-3. e. Inspection and Repair. FRAME 1 1. Check that sprocket (1) and clutch (2) have no cracks, breaks or other damage. If parts are damaged, get new ones. 2. Check that gear (3), and shaft (4) have no cracks, breaks or other damage. If parts are damaged, get new ones. 3. Check that housing (5) has no cracks, breaks or other damage. If part is damaged, get a new one. GO TO FRAME 2 17-679