TM 9-2320-209-34-2-2 c. Cleaning. There are no special cleaning procedures needed. Refer to cleaning procedures given in Part 1, para 1-3. NOTE Clean all parts before inspection and after repair. d. Inspection and Repair. FRAME 1 1. Check that clutch case cap ball bearing (1) and two drive sleeve ball bearings (2) are not worn or scored. If bearings are damaged, get new ones in their place. 2. Check that pressure plate release bearing (3) is not worn or scored. If bearing is damaged, take out bearing cup (4) and get a new bearing and bearing cup. GO TO FRAME 2 17-657