TM 9-2320-209-34-2-2 c. Cleaning. (1) Clean all bearings. Refer to Part 1, para 10-8. (2) There are no special cleaning procedures needed for all other parts. Refer to cleaning procedures given in Part 1, para 1-3. d. Inspection and Repair. 1. Check that springs (1) have no distortion, breaks or other damage. If springs are worn or damaged, get new ones. 2. Check that nuts (2), screws (3), and threaded holes have no damaged threads or heads. If parts are damaged, get new nuts and screws and rethread damaged holes. 3. Check that two bushings (4) are not scored, chipped or damaged in any other way. If bushings are damaged, get new ones. 4. Check that bracket (5), rods (6), levers (7), handles (8), arms (9), and beams (10) have no cracks, bends or wear. Repair by straightening or welding. Refer to FM 43-2 and TM 9-237. If more repair is needed, get new parts. END OF TASK 17-636