TM 9-2320-209-34-2-2 d. Cleaning. There are no special cleaning cleanlng proce ures given in Part 1, para 1-3. e. Inspection. procedures needed. Refer to 1. 2. 3. 4. NOTE Small chips, burrs or scratches on shafts, gears, and sprockets can be repaired. If parts are damaged in any other way, throw parts away and get new ones. Check that leveling worm gear (1), second reduction chain sprocket (2), and shaft (3) have no chips, burrs or scratches. Check that sprocket (2) and worm gear (1) have no chipped or broken teeth. Check that shaft (3) is not bent. Using magna flex, if available, check that worm gear (1), sprocket (2), and shaft (3) have no cracks. GO TO FRAME 2 17-594