TM 9-2320-209-34-2-2 FRAME 3 1. Using worm adjusting bearing wrench, Ioosen worm adjusting nut (1). 2. Make sure keyway in worm thrust washer (2) is alined with key (3) in wormshaft (4). NOTE Note how far wormshaft (4) sticks out of housing so that it can be put back the same way, 3. Using soft drift and hammer, tap round end of shaft (4) and take out sleeve bearing (5) and shaft. 4. Take out key (3). Take off sleeve bearing (5). GO TO FRAME 4 17-592