TM 9-2320-209-34-2-2 FRAME 3 1. Put gasket (1) on front retainer (2) and aline holes, 2. Put front retainer (2) with gasket (1) and main drive gear assembly (3) in housing (4) and aline holes. 3. Put in four screws (5) and lockwashers (6). Tighten every other screw evenly until retainer (2) is flush with housing (4). 4. Put gasket (7) on rear retainer (8). Aline holes in gasket with holes in housing (4). 5. Put in four screws (9) and lockwashers (10). GO TO FRAME 4 17-581