TM 9-2320-209-34-2-2 FRAME 2 1. 2. 3. 4. 5. Remove and disassemble intermediate gear assembly. Refer to para 17-47b and para 17-47c. If intermediate case second reduction drive pinion (1) and boring case rack drive gear (2) are alined as noted in frame 1 and shown in view A, add one second reduction feed pinion bearing shim (3). If intermediate case second reduction drive pinion (1) and boring case rack drive gear (2) are alined as noted in frame 1 and shown in view B, take out one second reduction feed pinion bearing shim (3). Assemble and replace intermediate gear assembly. Refer to para 17-47g and para 17-47h. Do frame 1 again. GO TO FRAME 3 17-563