TM 9-2320-209-34-2-2 (3) Feed pinion. 1. Take out eight machine bolts (1) and lockwashers (2). 2. Take off inspection plate (3) and gasket (4). 3. Working through inspection hole (5), check that front edge of intermediate case second reduction feed pinion (6) is alined with front edge of boring case rack feed idler gear (7) as shown. 4. If gears (6 and 7) are not alined, note the way gears are alined. IF GEARS ARE NOT ALINED, GO TO FRAME 2. IF GEARS ARE ALINED, GO TO FRAME 3 17-558