TM 9-2320-209-34-2-2 (2) First reduction feed gear and hub assembly. FRAME 1 1. Working through shaft hole in power leveler mounting flange (1), check that front edge of intermediate case first reduction feed gear and hub assembly (2) is alined with front edge of drive clutch and brake first reduction feed pinion (3) as shown. If gears (2 and 3) are not alined, note the way gears are alined. 2. IF GEARS ARE NOT ALINED, GO TO FRAME 2. IF GEARS ARE ALINED, GO TO FRAME 3 17-554