TM 9-2320-209-34-2-2 FRAME 2 1. 2. 3. 4. 5. 6. 7. Working at front of clutch case (1), take out four capscrews (2) and lockwashers (3). Take off cover (4) and gasket (5). If intermediate case first reduction drive gear (6) and drive clutch and brake first reduction drive pinion (7) are alined as shown in view A, add one shim (8). If intermediate case first reduction drive gear (6) and drive clutch and brake first reduction drive pinion (7) are alined as shown in view B, take off one shim (8). Put on gasket (5) and cover (4) and aline screw holes. Put in four capscrews (2) and lockwashers (3). Do frame 1 again. GO TO FRAME 3 17-551