FRAME 5 TM 9-2320-209-34-2-2 1. Slide feed pinion shaft (1) part way into drive pinion shaft (2) as shown. 2. Put two rubber bands (3) on feed pinion shaft (1) as shown. 3. Coat 24 bearing rollers (4) with oil. 4. Put 24 bearing rollers (4) under two rubber bands (3) on feed pinion shaft (1). 5. Slide feed pinion shaft (1) into drive pinion shaft (2) until 24 bearing rollers (4) are held in place by drive pinion (5). 6. Take off two rubber bands (3). GO TO FRAME 6 17-545