TM 9-2320-209-34-2-2 f. Repair. (1) Smooth out any chips, burrs or scratches with a honing stone. (2) Weld any cracks or small holes. Refer to TM 9-237. g. Assembly. NOTE Shims (1) must be same thickness as noted. 1. Put shims (1) on drive pinion shaft (2). NOTE When replacing ball bearing (3), bearing shield must face drive pinion (4). 2. Pack ball bearing (3) with grease. Put on ball bearing. 3. Put on adjusting nut (5) and retaining ring (6). GO TO FRAME 2 17-541