TM 9-2320-209-34-2-2 Dry cleaning near an open nearby when WARNING solvent is flammable. Do not use flame. Keep a fire extinguisher solvent is used. Use only in well- ventilated places. Failure to do this may result in injury to personnel and damage to equipment. Eye shields must be worn when using compressed air. Eye injury can occur if eye shields are not used. d. Cleaning. Clean all parts with dry cleaning solvent. Dry with compressed air. e. Inspection. FRAME 1 1. Check that access cover (1), cap (2), bearing retainer flange (3), and gear housing (4) are not scratched, chipped, cracked or have small holes. 2. Check that feed gear and hub assembly (5) and first reduction gear (6) are not burred, nicked, cracked or have damaged gear teeth. 3. Check that two pinion shafts (7) are not chipped, scratched, burred or have damaged gear teeth. 4. Check five bearings (8). Refer to Part 1, para 10-8. 5. Check that all thread parts are not stripped or crossthreaded. END OF TASK 17-540