TM 9-2320-209-34-2-2 d. Cleaning. There are no special cleaning procedures needed. Refer to cleaning procedures given in Part 1, para 1-3. NOTE Clean all parts before inspection and before assembly. e. Inspection and Repair. 1. Check that cab body (1), instrument panel (2), glove compartment (3), grab handle (4), plate (5), and vent door (6) have no cracks, dents, holes or torn welds. Straighten dents. Refer to FM 43-2. Weld cracks, holes, and torn welds. Refer to TM 9-237. 2. Check that vent screen (7), vent gasket (8), and hinge pin (9) have no breaks or other damage. If parts are damaged, get new ones in their place. GO TO FRAME 2 17-30