TM 9-2320-209-34-2-2 FRAME 4 NOTE Be sure area around manhole opening is clean before putting on cover (1). 1. Place outer manhole cover (1) with gasket (2) over manhole opening. 2. Swing yoke (3) down over cover (1). 3. Aline center holes in yoke (3) with hole in top of cover (1). 4. Push in pin (4). 5. Put cotter pin (5). 6. Lock handle (6) in hinge (7). 7. Put padlock (8) through hole in handle (6) and yoke (3). Lock padlock. 8. Do steps 1 through 8 again for other manhole cover (1). GO TO FRAME 5 17-355