TM 9-2320-209-34-2-2 NOTE If working on trucks M50A1 or M50A2, do this frame. If working on truck M50A3, go to frame 5. 1. Put in filler pipe (1). Put gasket (2) inside filler pipe. 2. Put in filler pipe (3) and aline it with filler pipe (1). 3. Put in six screws (4) with washers (5). 4. Put on filler cover (6) and put in pin (7). 5. Put in cotter pin (8). 6. Do steps 1 through 5 again for other filler pipe (1). GO TO FRAME 3 I 17-353