TM 9-2320-209-34-2-2 17-5. CAB REMOVAL, REPAIR, AND REPLACEMENT. TOOLS: No special tools required SUPPLIES: None PERSONNEL: T WO EQUIPMENT CONDITION: Truck parked, chocked. a. Preliminary Procedures. (1) (2) (3) (4) Refer to TM (5) Remove battery ground cables. engine off, handbrake set, wheels Refer to TM 9-2320-209-20. Remove hood. Refer to para 17-4. Remove left and right fenders. Refer to para 17-7. If working on trucks with tarpaulin cab cover, remove tarpaulin. 9-2320-209-10. If working on trucks with a hard top closure, remove hard top. Refer to Part 3, para 21-16. (6) Remove (7) Remove (8) Remove (9) Remove (10) Remove (11) Remove (12) Remove TM 9-2320-209-20. (13) Remove (14) Remove (15) Remove (16) Remove (17) Remove (18) Remove (19) Remove (20) Remove spare wheel assembly. Refer to TM 9-2320-209-10. windshield. Refer to TM 9-2320-209-20. engine air cleaner. Refer to TM 9-2320-209-20. instrument cluster. Refer to TM 9-2320-209-20. instrument electrical wiring harness. Refer to TM 9-2320-209-20. speedometer and tachometer cables. Refer to TM 9-2320-209-20. driver's seat and companion seat cushions. Refer to floor tunnels. Refer to TM 9-2320-209-20. headlight dimmer switch. Refer to TM 9-2320-209-20. brake and clutch pedals. Refer to TM 9-2320-209-20. transfer controls. Refer to TM 9-2320-209-20. transmission shifting levers. Refer to TM 9-2320-209-20. handbrake cable. Refer to TM 9-2320-209-20. throttle controls. Refer to TM 9-2320-209-20. accelerator controls. Refer to TM 9-2320-209-20. (21) If working on trucks with power takeoff, remove power takeoff controls. Refer to TM 9-2320-209-20. (22) Remove cab doors. Refer to TM 9-2320-209-20. (23) Remove steering column. Refer to Part 1, para 14-3. (24) Remove air pressure gage connector. Refer to Instrument Cluster Re- moval and Replacement, TM 9-2320-209-20. 17-14