TM 9-2320-209-34-2-2 1. Put snapring (1) and ball bearing (2) in. Press bearing and snapring (1 and 2) in outboard head (3). 2. Put new bearing cover gasket (4) and outboard bearing cover (5) on head. 3. Put in four lockwashers (6) and capscrews (7). 4. Put pressure relief lubrication fitting (8) and 45° lubrication fitting (9) in cover. 5. Put a thin coat of gasket Put head (3) on casing. 6. Put in eight lockwashers GO TO FRAME 3 cement on portion of heads contacting casing (10). (6) and capscrews (7). 17-243