TM 9-2320-209-34-2-2 NOTE Readings must be within limits given in table 17-2. The letter L indicates a loose fit and the letter T indicates a tight fit. If readings are not within given limits, throw away part and get a new one. 1. Measure liner inside diameter (1). 2. Measure thickness of four vanes (2). 3. Measure fit of four vanes (2) in four vane slots (3). END OF TASK Table 17-2. Vane and Liner Wear Limits and Fit Index Number Item /Point of Measurement 1 Liner inside diameter 2 Vane thickness 3 Fit of vanes in vane slots Size and Fit of New Parts Wear Limit (inches) (inches) 5.000 to 5.0020 None 0.4900 to 0.4950 None 0.0060L to 0.0150L None 17-239