TM 9-2320-209-34-2-2 FRAME 4 1. Slide rubber seals (1) into place over pipe connection. 2. Put two halves of coupling (2) in place. Put in two screws (3) and put on two nuts (4). 3. Do steps 1 and 2 again for coupling (5), then 4. Put line (6) in place and tighten two coupling NOTE tighten four nuts (4). nuts (7). Follow-on Maintenance Action Required: 1. Replace filter segregator access cover. Refer to TM 9-2320-209-20. 2. Refill filter segregator with fuel. Refer to TM 9-2320-209-10. END OF TASK 17-205