TM 9-2320-209-34-2-2 c. Cleaning. There are no special cleaning procedures needed. Refer to cleaning procedures given in Part 1, para 1-3. d. Inspection and Repair. FRAME 1 1. Check that all threaded parts are not stripped or crossthreaded. If parts are stripped or crossthreaded, get new ones. 2. Check that reflector (1) is not broken or damaged. If reflector is damaged, get a new one. 3. Check that hose compartment door (2) is not bent, dented, torn or cracked. Straighten bent or dented door. Refer to FM 43-2. Weld torn or cracked door, Refer to TM 9-237. If more repair is needed, get a new part. 4. Check that latch assembly (3), handle (4), retainer (5), pin (6), and spring (7) are not damaged. If parts are damaged, get new ones. END OF TASK 17-177