TM 9-2320-209-34-2-2 c. Cleaning. There are no special cleaning procedures needed. Refer to cleaning procedures given in Part 1, para 1-3. d. Inspection and Repair. FRAME 1 1. Check that body (1) is not bent, dented, cracked, and that it has no broken welds. Straighten bent or dented parts. Refer to FM 43-2. Weld tears or cracks. Refer to TM 9-237. 2. Check that nuts (2), bolts (3) and U-bolt (4) are not cracked or damaged and that they do not have any stripped threads. If parts are damaged, get new ones. 3. Check that two springs (5) and bracket (6) are not cracked, bent, or damaged Straighten bent or dented parts. Refer to FM 43-2. Weld tears or cracks. Refer to TM 9-237. 4. If more repair is needed, get new parts. END OF TASK 17-151