TM 9-2320-209-34-2-2 e. Assembly. FRAME 1 1. Put adjusting handle (1) in place and aline holes. Put in spring (2). 2. Put on pin (3) and flat washer (4). Put in cotter pin (5). 3. Put seat cushion (6) on frame (7). 4. Put in two capscrews (8) and put on nuts (9). 5. Put on backrest cushion (10). NOTE Follow-on Maintenance Action Required: Replace driver’s seat. Refer to TM 9-2320-209-20. END OF TASK 17-133