TM 9-2320-209-34-2-2 c. Cleaning. Clean allParts with stiff brush and soapy water. d. Inspection. Check that broken welds. e. Repair. (1) Straighten bent or (2) Weld cracks, holes f. Assembly. all parts have no bends, dents, cracks, holes or dented parts. Refer to FM 43-2. or broken welds. Refer to TM 9-237. FRAME 1 1. 2. 3. 4. Aline tool box (1) with support brackets (2). Put in 18 screws (3) and nuts (4). Put door catch (5) in place and aline screw holes. Put in machine screw and nut (7). Put door (8) in place and aline screw holes. Put in five machine screws and nuts (10). (6) (9) Put running board (11) in place and aline screw holes. Put in two screws (12) and nuts (13). NOTE Follow-on Maintenance Action Required: Replace gasoline drum bracket (14). Refer to TM 9-2320-209-20. END OF TASK 17-116