TM-9-2320-209-34-2-2 Page 113

TM-9-2320-209-34-2-2 Maintenance Part 2 for M44A1 and M44A2 Series Trucks

Page 113 of 899

TM 9-2320-209-34-2-2 FRAME 8 NOTE Follow-on Maintenance Action Required: 1. If working on left fender and truck has vehicular compartment heater, replace vehicular compartment heater and exhaust tube. Refer to TM 9-2320-209-20. 2. If working on left fender and truck has personnel hot water heater, put on personnel hot water heater. Refer to TM 9-2320-209-20. 3. If working on right fender of truck equipped with an exhaust stack, put on exhaust stack. Refer to TM 9-2320-209-20. 4. If working on right fender, put on air cleaner intake hood. Refer to TM 9-2320-209-20. 5. If working on right fender and vehicle is equipped with an engine compartment heater, put heater control wire in place and put on clamp. Refer to Hot Water Personnel Heater Blower Motor Repair, TM 9-2320-209-20. 6. If working on right fender, replace and close hood right side panel. If working on left fender, replace and close hood left side panel. Refer to TM 9-2320-209-10. 7. Close hood. Refer to TM 9-2320-209-10. END OF TASK 17-96