TM 9-2320-209-34-2-2 FRAME 2 Soldier A 1. Soldier B 2. 3. 4. 5. 6. 7. Hold fender (1) in place. Slip antisqueak material (2) in back of fender (1). Aline three slots in antisqueak material (2) with three holes in fender (1). Put in three screws with assembled washers (3). Put bolt (4) through fender (1) and fender brace (5). Put on flat washer (6) and self-locking nut (7). Do step 4 again for another bolt (4). Tighten three screws (3). Hold two bolts (4) and tighten two nuts (7). Put screw with assembled washer (8) in fender splash apron (9). Tighten screw (8). GO TO FRAME 3 17-90