TM 9-2320-209-34-2-2 d. Cleaning. There are no special cleaning procedures needed. Refer to cleaning procedures given in Part 1, para 1-3. e. Inspection and Repair. (1) Check that fender is not dented or bent. Straighten bends or dents. Refer to FM 43-2. (2) Check that fender is not cracked or torn and that it has no holes. Weld cracks, tears and holes. Refer to TM 9-237. (3) If fender needs more repair, get a new one. f. Assembly. FRAME 1 1. Put butt hinge (1) on fender (2) and aline screw holes. 2. Put in two screws (3). Put on and tighten two nuts (4) with two washers (5). END OF TASK 17-88