TM 9-2320-209-34-2-1 FRAME 3 1. Put new spring (1) on stem of new exhaust valve (2) as shown. 2. Put exhaust valve (2) and spring (1) into cage (3). 3. Put new inlet valve (4) on stem of exhaust valve (2) so that rubber side of inlet valve faces cage (3) as shown. 4. Put nut (5) on stem of exhaust valve (2) so that one full thread of exhaust valve sticks out. 5. Put a coat of preservative oil on all parts. END OF TASK 12-31