TM 9-2320-209-34-2-1 d. Cleaning. There are no special cleaning procedures needed. Refer to cleaning procedures given in para 1-3. e. Inspection and Repair. FRAME 1 1. Check that steering arm (1) is not bent, cracked or damaged. 2. Check that bushings (2) are not worn or damaged. 3. Check that five nuts (3), four lockwasher (4), grease fitting (5) , and ball stud (6) are not worn or damaged. 4. If any part is worn or damaged, get a new one. END OF TASK 10-110