TM 9-2320-209-34-2-1 h. Replacement of Bearing into Housing. TOOLS: No special tools required SUPPLIES: Solvent, dry cleaning, type II (SD-2), Fed. Spec P-D-680 Anti-seize compound, white lead, Fed. Spec TT-A-680-B-2 PERSONEL: One 1. 2. 3. 4. 5. 6. 7. WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. Using solvent, clean bore of housing (1). Coat bore of housing (1) with anti-seize compound. Put housing (1) in place in arbor press (2). Place bearing (3) squarely on bore of housing (1). Put sleeve (4) on outer race (5) of bearing ( 3). Put steel drive plate (6) on top of sleeve (4). Push bearing (3) into housing (1). END OF TASK 10-106