TM 9-2320-209-34-2-1 g. Replacement of Bearing onto Shaft. TOOLS : No special tools required SUPPLIES : Solvent, dry cleaning, Type II (SD- 2), Fed. Spec P-D-680 Anti-seize compound, white lead, Fed. Spec TT-A-680-B-2 PERSONNEL: One FRAME 1 WARNING Dry cleaning solvent is flammable. Do not use near an open flame. Keep a fire extinguisher nearby when solvent is used. Use only in well-ventilated places. Failure to do this may result in injury to personnel and damage to equipment. 1. Coat bearing seat on shaft (1) with anti-seize compound. 2. Hold shaft (1) in place in arbor press ( 2). 3. Place bearing (3) squarely on top of shaft (1). 4. Place sleeve (4) on inner race (5). Put steel drive plate (6) on sleeve (4) . 5. Press bearing (3) into place on shaft (1). END OF TASK 10-105