TM 9-2320-209-34-2-1 10-8. MAINTENANCE OF BEARINGS. NOTE Tasks are for general maintenance of bearings. Refer to TM 9-214 for more detailed information. a. Removal of Bearing from Shaft by Pressing. TOOLS : No special tools required SUPPLIES : None PERSONNEL : One FRAME 1 1. Hold shaft (1) with bearing (2) in arbor press (3). CAUTION Do not place steel bars (4) against shaft (1). Steel bars can scratch and score shaft. 2. Place two flat steel bars (4) between bearing (2) and base plate (5). Inner race (6) of bearing must rest firmly on steel bars. 3. Hold shaft (1) so it does not fall. Press bearing (2) from shaft. END OF TASK 10-99