TM 9-2320-209-34-2-1 1. Put helical gear (1) into vise. 2. Put four pinion gears (2) and four thrust washers (3) on spider (4). Soldier A 3. Hold spider assembly (4) together inside helical gear (l). Soldier B 4. Place two side gears (5) and thrust washers (6) into carrier case assembly (7). 5. Line up center punch marks on carrier case assembly (7) and helical gear (1) and put them together. 6. Put in eight bolts (8). 7. Put on eight nuts (9). Aline holes in nuts withholds in bolts (8). 8. Put safety wire (10) through eight nuts (9) and bolts (8). GO TO FRAME 23 10-90