TM 9-2320-209-34-2-1 FRAME 5 1. Using bearing preload tester, pn 7950157, (1), wrap cable (2) around through shaft (3). 2. Pull on tester (1) until shaft turns. If original bearings are used, reading should be 4 to 8 pound-inches. If new bearings are used, reading should be 12 to 18 pound-inches. 3. Take off tester (1). IF READING IS NOT WITHIN LIMITS GIVEN, GO TO FRAME 6. IF READING IS WITHIN LIMITS GIVEN, TAKE OUT THROUGH SHAFT (3) (REFER TO PARA 1O-7c, FRAME 10), THEN GO TO FRAME 7 10-73