TM 9-2320-209-34-2-1 f. Assembly and Adjustment. NOTE Coat bearings, gears, and seals with gear oil during assembly. FRAME 1 1. 2. 3. 4. 5. 6. 7. GO Place channel (1) on press (2). Place pinion gear (3) on channel (l). Place bearing (4) on pinion gear (3). Press bearing (4) onto pinion gear (3). Refer to para 10-8. Place two iron spacers (5) across channels (l). Place bearing (4) and pinion gear (3) on spacers (5). Press through shaft (6) into pinion gear (3). TO FRAME 2 10-69