frame 3 TM 9-2320-209-34-2-1 1. Check that universal joint (1) is not worn or damaged. If universal joint is worn or damaged, get a new one. 2. Check that inner shaft (2) and outer shaft (3) have no damaged splines (4), twisted or bent shafts or worn or damaged yokes (5). If inner shaft (2) or outer shaft (3) is damaged, get a new axle shaft assembly. 3. Check that four bearings (6) are not worn or damaged. If needles drop out of bearing or if journal bearing surfaces (7) show marks of needles, get all new bearings and journal. GO TO FRAME 4 10-33