frame 2 TM 9-2320-209-34-2-1 1. 2. 3. 4. 5. NOTE Readings must be within limits given in table 10-2. If readings are not within limits, throw away parts and get new ones. Measure inside diameter of seal retainer seat (1). Check that axle housing (2) has no nicks, burrs or scratches and is not bent or damaged in any other way. Rub out nicks, burrs or scratches with a fine mill file. If more repair is needed, get a new axle housing. Check that relief valves (3) are not clogged. If valves are damaged, get new ones. Check that filler plug (4), drain plug (5) and studs (6) have no threads. If parts are damaged, get new ones. Check that all threaded parts are not stripped or crossthreaded. END OF TASK stripped Table 10-2. Front Axle Assembly (Seal Retainer Seat) Wear Limits Size and Fit Index of New Parts Wear Limit Number Item/Point of Measurement (inches) (inches) 1 Seal retainer seat (inside 4.245 to 4.247 4.224 diameter) 10-18