frame 1 TM 9-2320-209-34-2-1 d. Inspection and Repair. NOTE Readings must be within limits given in table 10-1. If readings are not within given limits, throw away parts and get new ones. 1. 2. 3. 4. Using micrometer, measure Using micrometer, measure Using micrometer, measure Using micrometer, measure GO TO FRAME 2 outside diameter of steering knuckle pins outside diameter of ball stud (2). inside diameter of steering knuckle sleeve (3). inside diameter of bushing (4 and 5). Index Number 1 2 3 4 and 5 Table 10-1. Front Axle Assembly (Steering Knuckle) Wear Limits Item/Point of Measurement Steering knuckle pin (outside diameter) Ball stud (outside diameter) Steering knuckle sleeves (inside diameter) Bushing (inside diameter) Size and Fit of New Parts (inches) 1.1240 to 1.1235 1.245 to 1.235 1.248 to 1.250 1.1250 to 1.1260 Wear Limit (inches) 1.1230 to 1.1240 1.225 to 1.245 1.248 to 1.250 1.1250 to 1.1260 10-17