frame 3 TM 9-2320-209-34-2-1 Soldier A 1. Check that retainer and bushing (1) are on shock absorber (2). 2. Push up on rod (3) and put rod through rear hole in clamp plate (4) as shown. 3. Put rubber bushing (5) and retainer (6) on end of rod (3). Put on nut (7) enough to squeeze rubber bushings (1 and 5). 4. Put on nut (8) and tighten it against nut (7). Soldier B 5. Do steps 1 through 4 again on other shock absorber (2). GO TO FRAME 4 10-6