TM 9-2320-209-34-2-1 9-4. AIR ACTUATED TRANSMISSION TRANSFER ASSEMBLY REPAIR. Refer to TM 9-2520-246-34-1 for procedures to repair the air actuated transmission transfer assembly. 9-5. DOUBLE SPRAG TRANSMISSION TRANSFER REMOVAL, REPAIR AND REPLACEMENT. TOOLS : Transfer case fixture, pn 8708279 Air compressor wrench, pn 8390170 SUPPLIES : Lubricating oil, GO 80/90, MIL-L-2105 Kit, pn 5704132 (if available) PERSONNEL: One EQUIPMENT CONDITION: Truck parked, engine off, wheels chocked. a. Preliminary Procedures. (1) Raise one front wheel off ground. Refer to TM 9-2320-209-20. (2) Remove floorboard tunnels. Refer to TM 9-2320-209-20. (3) Remove front axle propeller shaft, transmission-to-transfer propeller shaft, and forward-rear axle propeller shaft from transfer. Refer to Propeller Shaft and Universal Joint Removal and Replacement, TM 9-2320-209-20. (4) On trucks with transfer power takeoff, remove transfer power takeoff shift control lever linkage. Refer to Transfer Controls and Linkage with Power Takeoff Removal and Replacement, TM 9-2320-209-20. (5) If working on trucks M49A1C, M49A2C, M50A2 or M50A3, remove delivery pump propeller shaft and auxiliary governor flexible shaft with adapter. Refer to Propeller Shaft and Universal Joint Removal and Replacement, TM 9-2320-209-20. (6) Remove speedometer flexible shaft and adapter. Refer to Speedometer Assembly Removal, Repair, and Replacement, TM 9-2320-209-20. (7) Remove handbrake cable from transfer. Refer to Handbrake Cable Assembly Removal and Replacement, TM 9-2320-209-20. (8) Remove transmission transfer reverse shift linkage. Refer to TM 9-2320-209-20. (9) Drain transfer case. Refer to LO 9-2320-209-12/1. 9-8