TM 9-2320-209-34-2-1 c. Replacement. NOTE If new harness is being put on, put old harness next to new harness and put tags in the same places as on old harness. Refer to replacement procedures given for each part in TM 9-2320-209-20, if needed, to work on connectors and electrical leads covered in this task. 1. Put harness back on truck. 2. Put two grommets (1) on firewall and aline screw holes. Put in two capscrews (2), washers (3) , and nuts (4) . 3. Replace all clamps. Refer to para 7-5. GO TO FRAME 2 7-23