FRAME 14 TM 9-2320-209-34-2-1 1. Put support bracket assembly (1) on intake manifold (2). 2. Put wiring harness ground terminal (3) under capscrew and lockwasher (4) at front of support bracket assembly (1). 3. Put in three capscrews and lockwashers (4). 4. Place ignition unit (5) on support bracket assembly (1) and hook up ignition unit clamp assembly (6). 5. Put ignition cable and conduit plug (7) in ignition unit (5). Put on nut (8). 6. Put wiring harness connector (9) on terminal of ignition unit (5). GO TO FRAME 15 2-244