FRAME 11 TM 9-2320-209-34-2-1 1. Put gasket (1) and intake manifold elbow (2) in place. Put on four nuts (3) and lockwashers (4). 2. Slide hose (5) in place. Tighten two nuts (6). 3. Put on ignition unit lead (7). 4. Put on two coupling nuts (8 and 9). IF WORKING ON ENGINE WITH TOP-MOUNTED, UNCOVERED MANIFOLD HEATER IGNITION UNIT, GO TO FRAME 12. IF WORKING ON ENGINE WITH TOP-MOUNTED, COVERED MANIFOLD HEATER IGNITION UNIT, GO TO FRAME 14 2-241