FRAME 7 TM 9-2320-209-34-2-1 1. Put hose (1) on breather tube adapter (2). Slide two hose clamps (3) on hose. 2. Put crankcase breather tube (4) in hose (1). Tighten two hose in place as shown. 3. Put clamp (5) over crankcase breather tube (4) and aline screw with screw hole in bracket (6). 4. Put in capscrew (7) and nut (8). 5. Put in adapter fitting (9). 6. Put on tube nut (10). GO TO FRAME 8 clamps (3) hole in clamp 2-237