FRAME 3 TM 9-2320-209-34-2-1 1. Put on six gaskets (1) and aline screw holes. 2. Put on front and rear cylinder head water outlet manifolds (2). Be sure hoses (3) are over manifold outlet pipes. 3. Put in eight screws and washers (4). 4. If working on engine with top-mounted, covered manifold heater, put in four screws (5). 5. Tighten hose clamps (6). IF WORKING ON ENGINE LD-465-1 OR LD-465-1C, GO TO FRAME 4. IF WORKING ON ENGINE LDT-465-1C, GO TO FRAME 8 2-233