frame 18 TM 9-2320-209-34-2-1 1. 2. 3. 4. 5. WARNING Do not touch any uninsulated or live connections during this task. Voltage output of ignition unit can cause dangerous electrical shock. Read warning notice on ignition unit. Unscrew nut (1) from ignition unit (2) and take out ignition cable and conduit assembly plug (3). Unscrew wiring harness connector (4) off ignition unit (2). Push down ignition unit clamp assembly (5) and unhook it from support bracket assembly (6). Take off ignition unit (2). Pull apart plug (7). Take out three capscrews and lockwashers (8), and lift support bracket assembly (6) and wiring harness (4) off intake manifold (9). GO TO FRAME 22 2-223