frame 3 TM 9-2320-209-34-2-1 1. Put capscrew (1) with lockwasher (2) in screwhole (3) of oil pressure regulator (4). 2. Put new oil pressure regulator (4) on gasket (5). 3. Put hole in cable clamp (6) over screwhole (7) of oil pressure regulator (4). 4. Put capscrews (1) with lockwashers (2) in three screwholes (7, 8, and 9) of oil pressure regulator (4). 5. Tighten capscrew (10) and three capscrews in screwholes (7, 8, and 9). NOTE Follow-on Maintenance Action Required: 1. Put on turbocharger air intake hose. Refer to para 2-21. 2. Check for oil leak. Refer to TM 9-2320-209-10. 3. Close right side panel and hood. Refer to TM 9-2320-209-10. END OF TASK 2-202